Home > Mesh Wifi Router >

10/100M Ethernet Port 2.4G 5.8G 1200Mbps Mesh Wifi Router

Product Categories

Shenzhen Zhibotong Electronics Co., Ltd.

Contact Now

10/100M Ethernet Port 2.4G 5.8G 1200Mbps Mesh Wifi Router

Brand Name : ZBT

Model Number : ZBT-L1

Certification : FCC/CE

Place of Origin : China

MOQ : 1unit

Price : 18-23

Payment Terms : T/T

Supply Ability : 100000units per month

Delivery Time : 3-25days

Packaging Details : 50units/carton

WAN Port : 1*10/100M Auto MDI/MDIX WAN /LAN Port

LAN Port : 1*10/100M Auto MDI/MDIX LAN Port

WLAN : 2.4G 300Mbps，5G 867Mbps

Main Chipset : RTL8197FNT-VE4-CG

Main Rate : 600MHz

FLASH : 8MByte

RAM : 64MByte

Wireless Rate : 1167Mbps

Buttom : Reset

Antenna : 2*3dBi internal antenna

Contact Now

1,Simple Introduction

MESH Routing System ZBT-L1 is a dual-band home wireless networking suite. Each node has a 10/100Mbps WAN/LAN adaptive port, a 10/100Mbps adaptive LAN port, and a wireless transmission rate of 1167Mbps.

2,Specification

Product name		10/100M Ethernet Port Mesh Router	Remark
Type		LAN uplink (compatible with WIFI uplink) device
Model		ZBT-L1
WAN Port		1*10/100M Auto MDI/MDIX WAN /LAN Port
LAN Port		1*10/100M Auto MDI/MDIX LAN Port
WLAN		2.4G 300Mbps,5G 867Mbps
Hardware	Main Chipset	RTL8197FNT-VE4-CG
	Main Rate	600MHz
	FLASH	8MByte	SOP8
	RAM	64MByte
	Adapter	9V1A
	LED	1*Integrated indicator	(Red,Green,Yellow)
	Buttom	Reset
	Antenna	2*3dBi	internal antenna
	Wireless Rate	1167Mbps
	Wireless Protocol	802.11b/g/n 2.4GHz; 802.11ac/a/n 5GHz
	Wired Protocol	802.3；802.3u
	MESH networking standard	802.11s
	Roaming standard	802.11v/r

3,Interface

Type	Demand item	Specification
Wire Interface	WAN Port	*110/100 Base-T Interface,IEEE802.3/802.3u Protocol, Support full-duplex / half-duplex flow control.**
	LAN Port	*110/100 Base-T Interface,IEEE802.3/802.3u Protocol,Support full-duplex / half-duplex flow control.**
	Adapter	*1DC Port,the router is powered by an external power adapter. External power adapter should: 1. Meet the EMC requirements of YD/T 983 and pass CCC certification; 2. Input voltage: 198V-242V ~ 50Hz; 3. Output voltage DC: 9V ± 5%, ripple range ± 100mV, output current: 1A; 4. The MTBF time of the power supply is: greater than 30,000 hours; 5. The power interface of the device itself and the DC output interface of the power adapter should be a unified international standard circular interface, and the DC head diameter is 2.1mm; 6. The adapter's DC output power cord can be optionally equipped with an EMI absorption magnetic ring; 7. Under normal conditions, the insulation resistance between the metal casing of the equipment and the power line should be not less than 50MΩ. 8, should have lightning protection against surge test, lightning protection level of at least 1.5KV.**
Wireless Port	Wi-Fi Networking	802.11b/g/n/a/ac;2.4GHz/5GHz,Wireless Rate 1167Mbps. *2 Internal 3dBi Omnidirectional dual frequency antenna. The Current wifi Device quantity can highly reach to 32**

4. Button and LED

Button and LED

Function Description

Reset

Press and hold the RST button for 6 seconds, then the indicator light flashes and then releases. The indicator light turns on and the system restarts. The last reply flashes to restore the factory settings.

LED

Long green light: good connection quality

Long yellow: the connection quality is normal

Red long light: connection failed

10/100M Ethernet Port 2.4G 5.8G 1200Mbps Mesh Wifi Router

Product Tags:

1GHz Wireless Mesh Router

1200Mbps Mesh Wireless Router

10/100M Ethernet Port 2.4G 5.8G 1200Mbps Mesh Wifi Router Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Zhibotong Electronics Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!